View source for Utilizing Scalar Electromagnetics to Tap Vacuum Energy

{{Infobox paper
| title = Utilizing Scalar Electromagnetics to Tap Vacuum Energy
| url = [https://web.archive.org/web/20190402071715/http://www.cheniere.org/techpapers/sweet%20bearden%201991/sweet%20bearden%201991.htm Link to paper (Internet Archive)]
| author = [[Tom Bearden]], [[Floyd A Sweet]]
| keywords = [[Scalar Electromagnetism]], [[Vacuum Energy]]
| published = 1991
| volume = [[4]]
| pages = 370-375
}}

'''Read the full paper''' [https://web.archive.org/web/20190402071715/http://www.cheniere.org/techpapers/sweet%20bearden%201991/sweet%20bearden%201991.htm here] ''(archived copy — the original link is no longer available)''

==Abstract==

Based on E.T. Whittaker's previously unnoticed 1903-1904 papers which established a hidden bidirectional EM wave structure in a standing forcefield free scalar potential, a method of directly engineering the ambient potential of the vacuum has been developed and realized experimentally.

Adding Whittaker's engineerable hidden variable theory to classical electro-magnetics, quantum mechanics, and general relativity produces supersets of each discipline. These supersets are joined by the common Whittaker subset, producing a unified field theory that is engineerable and tested.

By treating the nucleus of the atom as a pumped phase conjugate mirror, several working model energy units have been produced which excite and organize the local vacuum, increase the local virtual photon flux between local vacuum and nucleus, establish coherent self-oscillations between the local excited vacuum and the affected nuclei, utilize the self-oscillating standing wave for self-pumping of the nuclei/mirrors, introduce a very tiny signal wave to the mirrors, and output into an external load circuit a powerful, amplified, time-reversed phase conjugate replica wave at 60 Hertz frequency and nominal 120 volt sine wave power.

Several models have been built, ranging from 6 watts early on to one of 5 kilowatts. Both closed batteryless systems with damped positive feedback and open loop systems with battery-powered input have been successfully built. Open loop power gains of from 5 x 104 to 1.5 x 106 have been achieved.

Antigravity experiments have also been successfully conducted where the weight of the unit was reduced by 90% in controlled experiments, with a signal wave input of 175 microwatts and an output of 1 kilowatt.

The basic theory of the device is briefly explained and experimental results presented. In the demonstration session, a videotape of one operating open-loop unit with a 1.5 x 106 power gain is planned, as is the demonstration of an actual working model closed-loop system with a nominal rating of 500 watts, and without external power input of any kind.

The units are solid state, with no moving parts. Each of them comprises a unique form of self-powered vacuum triode of extraordinary gain, where the cathode power and plate power are freely furnished by the vacuum, and only a small grid signal need be furnished either from an external power source or by clamped positive feedback from the device's output. The output is negative energy, and some of its unique characteristics are pointed out.

Implications of the experimental application of the Sweet vacuum triode, the Bearden approach to the nucleus as a pumped phase conjugate mirror, and the unified field theory based on Whittaker's engineerable hidden variable scalar EM potential theory are also briefly addressed.

[[Category:Scientific Paper|utilizing scalar electromagnetics tap vacuum energy]]

[[Category:Relativity|utilizing scalar electromagnetics tap vacuum energy]]

[[Category:Zero Point Energy]]